IIS Plugin Reference 22.1.x

Requirements

XL Deploy requirements:
- XL Deploy: Version 5.1.0+
Infrastructural requirements:
- Administrative access to the target Windows machine is required.
- PowerShell 2.0 must be installed on the target machine.
- For IIS 7.0 support, the Windows PowerShell snap-in for IIS 7.0 must be installed on the target machine.

For more information about the Microsoft Internet Information Services (IIS) plugin, refer to Introduction to the XL Deploy IIS plugin.

Upgrading from IIS plugin 3.8.1 or below

If you are upgrading from IIS plugin 3.8.1 or below to IIS plugin 3.9.0 or up, please note that the port property on the iis.Website and iis.WebsiteSpec CIs have been replaced by the iis.WebsiteBinding and iis.WebsiteBindingSpec embedded CIs that are stored under the iis.Website and iis.WebsiteBinding CIs, respectively.

The XL Deploy repository is automatically upgraded the first time you start XL Deploy after installing IIS plugin 3.9.0. However, you must also ensure that packages imported into XL Deploy include the necessary iis.WebsiteBindingSpec CIs. Refer to the IIS Plugin Manual 3.9.x for an example.

Using the deployables and deployeds

Deployable vs. container table

The following table describes which deployable/container combinations are possible:

Deployable	Container	Generated deployed
iis.WebContent	iis.Server	iis.PublishedWebContent
iis.ApplicationSpec	iis.Server	iis.Application
iis.ApplicationPoolSpec	iis.Server	iis.ApplicationPool
iis.VirtualDirectorySpec	iis.Server	iis.VirtualDirectory
iis.WebsiteSpec	iis.Server	iis.Website
iis.ConfigCollectionElementSpec	iis.Server	iis.ConfigCollectionElement
iis.AttributeSpec	iis.Server	iis.Attribute
iis6.ApplicationSpec	iis6.Server	iis6.Application
iis6.ApplicationPoolSpec	iis6.Server	iis6.ApplicationPool
iis6.VirtualDirectorySpec	iis6.Server	iis6.VirtualDirectory
iis6.WebsiteSpec	iis6.Server	iis6.Website

Deployed actions table

The following table describes the effect a deployed has on its container:

Deployed	Actions performed for operations
	Create	Destroy	Modify	Noop
iis.PublishedWebContent	Copy web content to IIS server	Remove web content from IIS server	Remove old web content from and copy new web content to IIS server
iis.Application or iis6.Application	Create application	Destroy application	Modify application
iis.ApplicationPool or iis6.ApplicationPool	Create application pool Start application pool	Stop application pool Destroy application pool	Stop application pool Modify application pool Start application pool	Stop application pool (iff `stopStartOnNoop` equals `true`) Start application pool (iff `stopStartOnNoop` equals `true`)
iis.VirtualDirectory or iis6.VirtualDirectory	Create virtual directory	Destroy virtual directory	Modify virtual directory
iis.Website or iis6.Website	Create website Start website	Stop website Destroy website	Stop website Modify website Start website	Stop website (iff `stopStartOnNoop` equals `true`) Start website (iff `stopStartOnNoop` equals `true`)
iis.ConfigCollectionElement	Create config collection element	Destroy config collection element	Modify config collection element
iis.Atribute	Create attribute	Destroy attribute	Modify attribute

Release notes

IIS Plugin 10.2.0

[ENG-1581] : Allow IIS Plugin to modify ALL IIS settings via Deployment

IIS Plugin 9.7.0

[ENG-601] : [FI-60] IIS Plugin throws "Access is Denied" error on removing items

IIS Plugin 9.6.0

[XLINT-1107] : Add property (sslRequired) in WebsiteBinding to specify whether to use SSL for the content of a website or application

IIS Plugin 9.5.0

[XLINT-783] : Support Server Name Indication in SSL Binding

IIS Plugin 9.0.0

[XLINT-584] : IIS plugin application pool failed as the recycling specific time failed to be clear and duplication is not allowed

IIS Plugin 6.1.0

[XLINT-486] : IIS plugin RemoveItemCommand error if the target path contains hidden files
[XLINT-497] : IIS plugin - New property to allow XLD to wait before starting an application pool
[XLINT-555] : Add sleep before loading IIS module in PowerShell session
[XLINT-563] : IIS plugin should verify if applicationPool/website is stopped/started properly

IIS Plugin 6.0.3

[DEPL-13502] : Prevent Plaintext/Base64 Encoded Password Logging in Windows Event Logs

IIS plugin 6.0.2

[DEPL-9510] : Allow managedRuntimeVersion to set iis app pool to "No Managed Code"
[DEPL-12690] : IIS deployment logs password as plaintext in Windows Event Logs

IIS plugin 6.0.1

XL Deploy 6.0.0 compatibility.

IIS plugin 6.0.0

XL Deploy 6.0.0 compatibility.

IIS plugin 5.5.0

Improvements

[DEPL-9140] - IIS plugin cannot delete folder recursively due to powershell bug.

IIS plugin 5.1.0

Improvements

[DEPL-6545] - Added iis.ISAPIFilter and iis.ISAPIFitlerSpec CIs and additional properties on the iis.Website, iis.WebsiteSpec, iis.ApplicationPool, and iis.ApplicationPoolSpec CIs

IIS plugin 5.0.0

Compatible with XL Deploy 5.0.x.

IIS plugin 4.5.1

Bug fixes

[DEPL-7796] - Setting ASP.NET impersonation or forms authentication adds invalid entries to applicationHost.config

IIS plugin 4.5.0

New features

[DEPL-7661] - Support setting authentication options on sites and applications
[DEPL-7582] - Enable / disable directory browsing during website deployment

Bug fixes

[DEPL-5773] - Starting or stopping an application/website that does not exist should raise an exception

IIS plugin 4.0.0

Added support for IIS 8.5 (Windows Server 2012 R2).

Improvements and bug fixes

[DEPL-5468] - Error when starting/stopping an IIS application pool/website that has already been started/stopped.
[DEPL-5229] - Added support for secure (HTTPS) bindings.
[DEPL-5453] - Added support for enable32bitOnWin64 to be set on an IIS application pool(s).
[DEPL-5446] - Added support to sleep after creating an IIS application pool as configurable property on iis.Server.

IIS plugin 3.9.0

Added support for IIS 6.0 (Windows Server 2003 R2).

Improvements and bug fixes

Changed default of stopStartOnNoop on iis.Website and iis.ApplicationPool to true.
DEPLOYITPB-4237 - Changed iis.Website and iis6.website to have multiple bindings instead of just one IP/port/hostHeader combination. This change requires you to update your repository and your packages.
DEPLOYITPB-4367 - Added stop and start steps for application pools.
DEPLOYITPB-4392 - Create/modify, destroy, stop and start scripts are now idempotent, i.e. they work correctly even if the state of the middleware is not exactly how they expect it to be. Modifying a configuration item now only triggers the create/modify script not the destroy script so that configuration item is modified in place instead of being destroyed first.

IIS plugin 3.8.1

Added support for IIS 7.0 (Windows Server 2008).
Added support for IIS 8.0 (Windows Server 2012).

Improvements and bug fixes

DEPLOYITPB-3947 - Added manual for IIS plugin.
DEPLOYITPB-4234 - Added workaround for bug in PowerShell that causes it to throw a New-Item : Index was outside the bounds of the array. error when no websites are available yet.

IIS plugin 3.8.0

First public release to coincide with the release of Deployit 3.8.0.

Improvements

Added properties to allow the technical name of a configuration item to be different from the name in Deployit, e.g. websiteName on iis.Website.

IIS plugin 3.7.1

Fixed bug that caused IIS deployeds to be created underneath all PowerShell containers.

IIS plugin 3.7.0

Initial release of IIS plugin for IIS 7.5 (Windows 2008 R2).

CI Reference

Configuration Item Overview

Deployables

CI	Description
iis.ApplicationPoolSpec	Specification of an IIS application pool
iis.ApplicationSpec	Specification of an IIS application
iis.AttributeSpec	Specification of an IIS Configuration Attribute
iis.ConfigCollectionElementSpec	Specification of an IIS ConfigCollectionElementSpec
iis.VirtualDirectorySpec	Specification of an IIS virtual directory
iis.WebContent	Folder containing IIS web content (ASP pages, HTML pages, images, stylesheets, and so on). Important: When packaging web content as a ZIP file, do so at the level of the content, not at the level of the folder that contains it.
iis.WebsiteSpec	Specification of an IIS website

Deployeds

CI	Description
iis.Application	Deploys an IIS Application
iis.ApplicationPool	Creates an IIS application pool
iis.Attribute	Adds an IIS Attribute
iis.ConfigCollectionElement	Creates an IIS ConfigCollectionElement
iis.PublishedWebContent	Published IIS web content
iis.Resource	Description unavailable
iis.VirtualDirectory	Creates an IIS virtual directory
iis.Website	Deploys an IIS website

Containers

CI	Description
iis.Server	Internet Information Services server definition

Other Configuration Items

CI	Description
iis.Authentication	Configure authentication settings for sites and applications
iis.AuthenticationSpec	Configure authentication settings for sites and applications
iis.ISAPIFilter	Creates an IIS website ISAPI Filter
iis.ISAPIFilterSpec	Specification of an IIS ISAPI filter
iis.WebsiteBinding	Create an IIS website binding
iis.WebsiteBindingSpec	Specification of an IIS website binding

Configuration Item Details

iis.Application

Type Hierarchy	iis.Resource >> powershell.ExtensiblePowerShellDeployed >> powershell.BaseExtensiblePowerShellDeployed >> powershell.BasePowerShellDeployed >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Deployed, udm.EmbeddedDeployedContainer

Deploys an IIS Application

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Children
		authentication: SET_OF_CI<iis.Authentication>
		Authentication settings for this website

		Public properties
		applicationPoolName: STRING = DefaultAppPool
		Name of the application pool for this website.
		directoryBrowse_showFlags: STRING = Date,Time,Size,Extension
		The showFlags attribute can have one or more of the following possible values. If you specify more than one value, separate the values with a comma (,). The default values are Date, Time, Size, Extension. None specifies that only the file or directory names are returned in a directory listing.
		physicalPath: STRING
		Physical path of this application
		protocols: STRING = http
		Protocols supported by this application
		websiteName: STRING
		Name of the website under which to create this application
		applicationPath: STRING
		Path of this application within the website. Defaults to the name of the deployed if not specified
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		directoryBrowse_enabled: BOOLEAN
		Specifies whether directory browsing is enabled (true) or disabled (false) on the Web server.
		startOnCreate: BOOLEAN = true
		If set to true, the start script will be executed if this deployed is being created.
		stopOnDestroy: BOOLEAN = true
		If set to true, the stop script will be executed if this deployed is being destroyed.
		stopStartOnModify: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployed is being modified.
		stopStartOnNoop: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployable is not being modified.

		Hidden properties
		createOptions: SET_OF_STRING = [uploadArtifactData, uploadClasspathResources]
		Options for the create step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		createOrder: INTEGER = 60
		Order at which the create step will be executed.
		createScript: STRING = iis/create-or-modify-application.ps1
		PowerShell script invoked to create a resource (or deploy an artifact) on Windows.
		createVerb: STRING = Create
		Verb that is used to prefix the description for the create step.
		destroyOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the destroy step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		destroyOrder: INTEGER = 40
		Order at which the destroy step will be executed.
		destroyScript: STRING = iis/destroy-application.ps1
		PowerShell script invoked to destroy a resource (or undeploy an artifact) on Windows.
		destroyVerb: STRING = Destroy
		Verb that is used to prefix the description for the destroy step.
		discoverOrder: INTEGER = 50
		Order at which the discover step will be executed.
		discoverScript: STRING = iis/inspect-applications.ps1
		Script invoked to discover and inspect deployeds of this type.
		libraryScripts: LIST_OF_STRING = [iis/library/resource.ps1]
		List of scripts to append to the the step script.
		maxBatchSize: INTEGER = 100
		Maximum number of steps in a batch.
		modifyOptions: SET_OF_STRING = [uploadArtifactData, exposePreviousDeployed]
		Options for the modify step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		modifyOrder: INTEGER = 60
		Order at which the modify step will be executed.
		modifyScript: STRING = iis/create-or-modify-application.ps1
		PowerShell script invoked to modify a resource (or an artifact) on Windows.
		modifyVerb: STRING = Modify
		Verb that is used to prefix the description for the modify step.
		noopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the noop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		noopOrder: INTEGER = 50
		Order at which the noop step will be executed.
		noopVerb: STRING = Noop
		Verb that is used to prefix the description for the noop step.
		startOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the start step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		startOrder: INTEGER = 90
		Order at which the start step will be executed.
		startVerb: STRING = Start
		Verb that is used to prefix the description for the start step.
		stopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the stop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		stopOrder: INTEGER = 10
		Order at which the stop script will be executed.
		stopVerb: STRING = Stop
		Verb that is used to prefix the description for the stop step.
		batchSteps: BOOLEAN
		If set to true, multiple steps at the same order will be batched together in one batch to improve performance over high-latency WinRM connections
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.
		classpathResources: SET_OF_STRING
		Additional classpath resources that should be uploaded to the working directory before executing the script.
		exposePasswordPropertiesOnHosts: BOOLEAN
		Whether to add the host password to the powershell variable values.
		noopScript: STRING
		PowerShell script invoked to noop a resource or an artifact on Windows.
		startScript: STRING
		PowerShell script invoked to start a resource of an artifact on Windows.
		stopScript: STRING
		PowerShell script invoked to stop a resource or an artifact on Windows.
		useSidecarIniFile: BOOLEAN
		Whether to use a sidecar '.ini' file to transfer the powershell variable values.

iis.ApplicationPool

Type Hierarchy	powershell.ExtensiblePowerShellDeployed >> powershell.BaseExtensiblePowerShellDeployed >> powershell.BasePowerShellDeployed >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Deployed, udm.EmbeddedDeployedContainer

Creates an IIS application pool

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Public properties
		managedRuntimeVersion: ENUM [nmc, v1.0, v1.1, v2.0, v4.0] = v4.0
		The managed .NET runtime version to use.
		serviceAccount: STRING = ApplicationPoolIdentity
		Application pool can run as several built-in service accounts. Valid values are NetworkService, LocalService, LocalSystem, ApplicationPoolIdentity, SpecificUser.
		applicationPoolName: STRING
		Name of this application pool. Defaults to the name of the deployed if not specified
		cleanRecycleTimes: BOOLEAN = true
		Clear previous recycling times added to IIS Application Pool.
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		enable32BitAppOnWin64: BOOLEAN
		When the Enable32BitAppOnWin64 property is set to true, a 32-bit application is allowed to run on a computer than has a 64-bit processor.
		failureRapidFailProtection: BOOLEAN = true
		Setting to true instructs the WWW service to remove from service all applications that are in an application pool.
		failureRapidFailProtectionInterval: INTEGER = 5
		Specifies the number of minutes before the failure count for a process is reset.
		failureRapidFailProtectionMaxCrashes: INTEGER = 5
		Specifies the maximum number of failures that are allowed within the number of minutes specified by the rapidFailProtectionInterval attribute.
		numberOfChecks: INTEGER = 3
		Specifies the number of times to checks when stopping/starting the application pool. Will fail step if all attempts fails. Default value is 3 times
		password: STRING
		Password for application pool specific user account
		processModelIdleTimeout: INTEGER = 20
		Specifies how long a worker process should run idle if no new requests are received and the worker process is not processing requests. After the allocated time passes, the worker process should request that it be shut down by the WWW service (minutes).
		processModelMaxProcesses: INTEGER = 1
		Specifies the number of worker processes associated with the application pool. A value other than 1 indicates a Web garden.
		processModelPingEnabled: BOOLEAN = true
		If True, the worker process(es) serving this application pool are pinged periodically to ensure that they are still responsive
		processModelPingInterval: INTEGER = 30
		Specifies the time between health-monitoring pings that the WWW service sends to a worker process (seconds).
		processModelPingResponseTime: INTEGER = 90
		Specifies the time that a worker process is given to respond to a health-monitoring ping. After the time limit is exceeded, the WWW service terminates the worker process. (seconds)
		processModelShutdownTimeLimit: INTEGER = 90
		Specifies the time that the W3SVC service waits after it initiated a recycle. If the worker process does not shut down within the shutdownTimeLimit, it will be terminated by the W3SVC service (seconds).
		processModelStartupTimeLimit: INTEGER = 90
		Specifies the time that IIS waits for an application pool to start. If the application pool does not startup within the startupTimeLimit, the worker process is terminated and the rapid-fail protection count is incremented (seconds).
		queueLength: INTEGER = 1000
		Maximum number of requests that Http.sys queues for the application pool.
		recyclingPeriodicRestartSchedule: SET_OF_STRING
		Set of specific local times, in 24 hour format (e.g 12:12:00,14:00:00), when the application pool is recycled.
		recyclingPeriodicRestartTime: INTEGER = 1740
		Period of time (in minutes) after which an application pool will recycle.
		sleepAfterCreate: INTEGER = 2
		Specifies the number of seconds to pause for a new application pool to become responsive after creation.
		sleepBeforeStart: INTEGER
		Specifies the number of seconds to pause during deployment before starting the application pool. Default value is 0 second
		sleepBetweenChecks: INTEGER = 5
		Specifies the number of seconds to wait between checks when stopping/starting the application pool. Default value is 5 seconds
		startOnCreate: BOOLEAN = true
		If set to true, the start script will be executed if this deployed is being created.
		stopOnDestroy: BOOLEAN = true
		If set to true, the stop script will be executed if this deployed is being destroyed.
		stopStartOnModify: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployed is being modified.
		stopStartOnNoop: BOOLEAN = true
		If set to true, this application pool is stopped and started when another component in the same package is deployed
		useClassicManagedPipeline: BOOLEAN
		Configures ASP.NET to run in Classic Mode as an ISAPI extention. When not selected, Integrated Mode is used.
		username: STRING
		When service account is 'SpecificUser', application pool will run as a specific user

		Hidden properties
		createOptions: SET_OF_STRING = [uploadArtifactData, uploadClasspathResources]
		Options for the create step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		createOrder: INTEGER = 56
		Order at which the create step will be executed.
		createScript: STRING = iis/create-or-modify-application-pool.ps1
		PowerShell script invoked to create a resource (or deploy an artifact) on Windows.
		createVerb: STRING = Create
		Verb that is used to prefix the description for the create step.
		destroyOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the destroy step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		destroyOrder: INTEGER = 44
		Order at which the destroy step will be executed.
		destroyScript: STRING = iis/destroy-application-pool.ps1
		PowerShell script invoked to destroy a resource (or undeploy an artifact) on Windows.
		destroyVerb: STRING = Destroy
		Verb that is used to prefix the description for the destroy step.
		discoverOrder: INTEGER = 50
		Order at which the discover step will be executed.
		discoverScript: STRING = iis/inspect-application-pools.ps1
		Script invoked to discover and inspect deployeds of this type.
		maxBatchSize: INTEGER = 100
		Maximum number of steps in a batch.
		modifyOptions: SET_OF_STRING = [uploadArtifactData, exposePreviousDeployed]
		Options for the modify step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		modifyOrder: INTEGER = 56
		Order at which the modify step will be executed.
		modifyScript: STRING = iis/create-or-modify-application-pool.ps1
		PowerShell script invoked to modify a resource (or an artifact) on Windows.
		modifyVerb: STRING = Modify
		Verb that is used to prefix the description for the modify step.
		noopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the noop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		noopOrder: INTEGER = 50
		Order at which the noop step will be executed.
		noopVerb: STRING = Noop
		Verb that is used to prefix the description for the noop step.
		startOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the start step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		startOrder: INTEGER = 86
		Order at which the start step will be executed.
		startScript: STRING = iis/start-application-pool.ps1
		PowerShell script invoked to start a resource of an artifact on Windows.
		startVerb: STRING = Start
		Verb that is used to prefix the description for the start step.
		stopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the stop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		stopOrder: INTEGER = 14
		Order at which the stop script will be executed.
		stopScript: STRING = iis/stop-application-pool.ps1
		PowerShell script invoked to stop a resource or an artifact on Windows.
		stopVerb: STRING = Stop
		Verb that is used to prefix the description for the stop step.
		batchSteps: BOOLEAN
		If set to true, multiple steps at the same order will be batched together in one batch to improve performance over high-latency WinRM connections
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.
		classpathResources: SET_OF_STRING
		Additional classpath resources that should be uploaded to the working directory before executing the script.
		exposePasswordPropertiesOnHosts: BOOLEAN
		Whether to add the host password to the powershell variable values.
		libraryScripts: LIST_OF_STRING
		List of scripts to append to the the step script.
		noopScript: STRING
		PowerShell script invoked to noop a resource or an artifact on Windows.
		useSidecarIniFile: BOOLEAN
		Whether to use a sidecar '.ini' file to transfer the powershell variable values.

iis.ApplicationPoolSpec

Type Hierarchy	powershell.BasePowerShellDeployable >> udm.BaseDeployable >> udm.BaseConfigurationItem
Interfaces	udm.Deployable, udm.Taggable

Specification of an IIS application pool

		Public properties
		applicationPoolName: STRING
		Name of this application pool. Defaults to the name of the deployed if not specified (string)
		cleanRecycleTimes: STRING
		Clear previous recycling times added to IIS Application Pool. (boolean) default(true)
		enable32BitAppOnWin64: STRING
		When the Enable32BitAppOnWin64 property is set to true, a 32-bit application is allowed to run on a computer than has a 64-bit processor. (boolean) default(false)
		failureRapidFailProtection: STRING
		Setting to true instructs the WWW service to remove from service all applications that are in an application pool. (boolean) default(true)
		failureRapidFailProtectionInterval: STRING
		Specifies the number of minutes before the failure count for a process is reset. (integer) default(5)
		failureRapidFailProtectionMaxCrashes: STRING
		Specifies the maximum number of failures that are allowed within the number of minutes specified by the rapidFailProtectionInterval attribute. (integer) default(5)
		managedRuntimeVersion: STRING
		The managed .NET runtime version to use. (enum) values(nmc, v1.0, v1.1, v2.0, v4.0) default(v4.0)
		numberOfChecks: STRING
		Specifies the number of times to checks when stopping/starting the application pool. Will fail step if all attempts fails. Default value is 3 times (integer) default(3)
		password: STRING
		Password for application pool specific user account (string)
		processModelIdleTimeout: STRING
		Specifies how long a worker process should run idle if no new requests are received and the worker process is not processing requests. After the allocated time passes, the worker process should request that it be shut down by the WWW service (minutes). (integer) default(20)
		processModelMaxProcesses: STRING
		Specifies the number of worker processes associated with the application pool. A value other than 1 indicates a Web garden. (integer) default(1)
		processModelPingEnabled: STRING
		If True, the worker process(es) serving this application pool are pinged periodically to ensure that they are still responsive (boolean) default(true)
		processModelPingInterval: STRING
		Specifies the time between health-monitoring pings that the WWW service sends to a worker process (seconds). (integer) default(30)
		processModelPingResponseTime: STRING
		Specifies the time that a worker process is given to respond to a health-monitoring ping. After the time limit is exceeded, the WWW service terminates the worker process. (seconds) (integer) default(90)
		processModelShutdownTimeLimit: STRING
		Specifies the time that the W3SVC service waits after it initiated a recycle. If the worker process does not shut down within the shutdownTimeLimit, it will be terminated by the W3SVC service (seconds). (integer) default(90)
		processModelStartupTimeLimit: STRING
		Specifies the time that IIS waits for an application pool to start. If the application pool does not startup within the startupTimeLimit, the worker process is terminated and the rapid-fail protection count is incremented (seconds). (integer) default(90)
		queueLength: STRING
		Maximum number of requests that Http.sys queues for the application pool. (integer) default(1000)
		recyclingPeriodicRestartSchedule: SET_OF_STRING
		Set of specific local times, in 24 hour format (e.g 12:12:00,14:00:00), when the application pool is recycled. (set_of_string)
		recyclingPeriodicRestartTime: STRING
		Period of time (in minutes) after which an application pool will recycle. (integer) default(1740)
		serviceAccount: STRING
		Application pool can run as several built-in service accounts. Valid values are NetworkService, LocalService, LocalSystem, ApplicationPoolIdentity, SpecificUser. (string) default(ApplicationPoolIdentity)
		sleepAfterCreate: STRING
		Specifies the number of seconds to pause for a new application pool to become responsive after creation. (integer) default(2)
		sleepBeforeStart: STRING
		Specifies the number of seconds to pause during deployment before starting the application pool. Default value is 0 second (integer) default(0)
		sleepBetweenChecks: STRING
		Specifies the number of seconds to wait between checks when stopping/starting the application pool. Default value is 5 seconds (integer) default(5)
		startOnCreate: STRING
		If set to true, the start script will be executed if this deployed is being created. (boolean) default(true)
		stopOnDestroy: STRING
		If set to true, the stop script will be executed if this deployed is being destroyed. (boolean) default(true)
		stopStartOnModify: STRING
		If set to true, the stop and start scripts will be executed if this deployed is being modified. (boolean) default(true)
		stopStartOnNoop: STRING
		If set to true, this application pool is stopped and started when another component in the same package is deployed (boolean) default(true)
		tags: SET_OF_STRING
		If set, this deployable will only be mapped automatically to containers with the same tag.
		useClassicManagedPipeline: STRING
		Configures ASP.NET to run in Classic Mode as an ISAPI extention. When not selected, Integrated Mode is used. (boolean)
		username: STRING
		When service account is 'SpecificUser', application pool will run as a specific user (string)

		Hidden properties
		boundTemplates: SET_OF_CI<udm.Template>
		The set of CI templates.

iis.ApplicationSpec

Type Hierarchy	powershell.BasePowerShellDeployable >> udm.BaseDeployable >> udm.BaseConfigurationItem
Interfaces	udm.Deployable, udm.Taggable

Specification of an IIS application

		Children
		authentication: SET_OF_CI<iis.AuthenticationSpec>
		Authentication settings for this website

		Public properties
		applicationPath: STRING
		Path of this application within the website. Defaults to the name of the deployed if not specified (string)
		applicationPoolName: STRING
		Name of the application pool for this website. (string) default(DefaultAppPool)
		directoryBrowse_enabled: STRING
		Specifies whether directory browsing is enabled (true) or disabled (false) on the Web server. (boolean) default(false)
		directoryBrowse_showFlags: STRING
		The showFlags attribute can have one or more of the following possible values. If you specify more than one value, separate the values with a comma (,). The default values are Date, Time, Size, Extension. None specifies that only the file or directory names are returned in a directory listing. (string) default(Date,Time,Size,Extension)
		physicalPath: STRING
		Physical path of this application (string)
		protocols: STRING
		Protocols supported by this application (string) default(http)
		startOnCreate: STRING
		If set to true, the start script will be executed if this deployed is being created. (boolean) default(true)
		stopOnDestroy: STRING
		If set to true, the stop script will be executed if this deployed is being destroyed. (boolean) default(true)
		stopStartOnModify: STRING
		If set to true, the stop and start scripts will be executed if this deployed is being modified. (boolean) default(true)
		stopStartOnNoop: STRING
		If set to true, the stop and start scripts will be executed if this deployable is not being modified. (boolean) default(true)
		tags: SET_OF_STRING
		If set, this deployable will only be mapped automatically to containers with the same tag.
		websiteName: STRING
		Name of the website under which to create this application (string)

		Hidden properties
		boundTemplates: SET_OF_CI<udm.Template>
		The set of CI templates.

iis.Attribute

Type Hierarchy	iis.Resource >> powershell.ExtensiblePowerShellDeployed >> powershell.BaseExtensiblePowerShellDeployed >> powershell.BasePowerShellDeployed >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Deployed, udm.EmbeddedDeployedContainer

Adds an IIS Attribute

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Public properties
		attributes: STRING
		attribute names and values in name~value format, one attribute per line
		directoryBrowse_showFlags: STRING = Date,Time,Size,Extension
		The showFlags attribute can have one or more of the following possible values. If you specify more than one value, separate the values with a comma (,). The default values are Date, Time, Size, Extension. None specifies that only the file or directory names are returned in a directory listing.
		filter: STRING
		Specifies the IIS configuration section, or an XPath query that returns a configuration element.
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		directoryBrowse_enabled: BOOLEAN
		Specifies whether directory browsing is enabled (true) or disabled (false) on the Web server.
		psPath: STRING
		Specifies the configuration path. This can be either an IIS configuration path in the format computer name/webroot/apphost, or the IIS module path in this format IIS:\sites\Default Web Site.
		startOnCreate: BOOLEAN = true
		If set to true, the start script will be executed if this deployed is being created.
		stopOnDestroy: BOOLEAN = true
		If set to true, the stop script will be executed if this deployed is being destroyed.
		stopStartOnModify: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployed is being modified.
		stopStartOnNoop: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployable is not being modified.

		Hidden properties
		createOptions: SET_OF_STRING = [uploadArtifactData, uploadClasspathResources]
		Options for the create step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		createOrder: INTEGER = 60
		Order at which the create step will be executed.
		createScript: STRING = iis/create-or-modify-attribute.ps1
		PowerShell script invoked to create a resource (or deploy an artifact) on Windows.
		createVerb: STRING = Create
		Verb that is used to prefix the description for the create step.
		destroyOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the destroy step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		destroyOrder: INTEGER = 40
		Order at which the destroy step will be executed.
		destroyScript: STRING = iis/destroy-attribute.ps1
		PowerShell script invoked to destroy a resource (or undeploy an artifact) on Windows.
		destroyVerb: STRING = Destroy
		Verb that is used to prefix the description for the destroy step.
		discoverOrder: INTEGER = 50
		Order at which the discover step will be executed.
		libraryScripts: LIST_OF_STRING = [iis/library/resource.ps1]
		List of scripts to append to the the step script.
		maxBatchSize: INTEGER = 100
		Maximum number of steps in a batch.
		modifyOptions: SET_OF_STRING = [exposePreviousDeployed]
		Options for the modify step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		modifyOrder: INTEGER = 60
		Order at which the modify step will be executed.
		modifyScript: STRING = iis/create-or-modify-attribute.ps1
		PowerShell script invoked to modify a resource (or an artifact) on Windows.
		modifyVerb: STRING = Modify
		Verb that is used to prefix the description for the modify step.
		noopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the noop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		noopOrder: INTEGER = 50
		Order at which the noop step will be executed.
		noopVerb: STRING = Noop
		Verb that is used to prefix the description for the noop step.
		startOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the start step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		startOrder: INTEGER = 90
		Order at which the start step will be executed.
		startVerb: STRING = Start
		Verb that is used to prefix the description for the start step.
		stopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the stop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		stopOrder: INTEGER = 10
		Order at which the stop script will be executed.
		stopVerb: STRING = Stop
		Verb that is used to prefix the description for the stop step.
		batchSteps: BOOLEAN
		If set to true, multiple steps at the same order will be batched together in one batch to improve performance over high-latency WinRM connections
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.
		classpathResources: SET_OF_STRING
		Additional classpath resources that should be uploaded to the working directory before executing the script.
		discoverScript: STRING
		Script invoked to discover and inspect deployeds of this type.
		exposePasswordPropertiesOnHosts: BOOLEAN
		Whether to add the host password to the powershell variable values.
		location: STRING
		Location of the configuration property setting.
		noopScript: STRING
		PowerShell script invoked to noop a resource or an artifact on Windows.
		startScript: STRING
		PowerShell script invoked to start a resource of an artifact on Windows.
		stopScript: STRING
		PowerShell script invoked to stop a resource or an artifact on Windows.
		useSidecarIniFile: BOOLEAN
		Whether to use a sidecar '.ini' file to transfer the powershell variable values.

iis.AttributeSpec

Type Hierarchy	powershell.BasePowerShellDeployable >> udm.BaseDeployable >> udm.BaseConfigurationItem
Interfaces	udm.Deployable, udm.Taggable

Specification of an IIS Configuration Attribute

		Public properties
		attributes: STRING
		attribute names and values in name~value format, one attribute per line (string)
		directoryBrowse_enabled: STRING
		Specifies whether directory browsing is enabled (true) or disabled (false) on the Web server. (boolean) default(false)
		directoryBrowse_showFlags: STRING
		The showFlags attribute can have one or more of the following possible values. If you specify more than one value, separate the values with a comma (,). The default values are Date, Time, Size, Extension. None specifies that only the file or directory names are returned in a directory listing. (string) default(Date,Time,Size,Extension)
		filter: STRING
		Specifies the IIS configuration section, or an XPath query that returns a configuration element. (string)
		psPath: STRING
		Specifies the configuration path. This can be either an IIS configuration path in the format computer name/webroot/apphost, or the IIS module path in this format IIS:\sites\Default Web Site. (string)
		startOnCreate: STRING
		If set to true, the start script will be executed if this deployed is being created. (boolean) default(true)
		stopOnDestroy: STRING
		If set to true, the stop script will be executed if this deployed is being destroyed. (boolean) default(true)
		stopStartOnModify: STRING
		If set to true, the stop and start scripts will be executed if this deployed is being modified. (boolean) default(true)
		stopStartOnNoop: STRING
		If set to true, the stop and start scripts will be executed if this deployable is not being modified. (boolean) default(true)
		tags: SET_OF_STRING
		If set, this deployable will only be mapped automatically to containers with the same tag.

		Hidden properties
		boundTemplates: SET_OF_CI<udm.Template>
		The set of CI templates.

iis.Authentication

Type Hierarchy	udm.BaseEmbeddedDeployed >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployed, udm.EmbeddedDeployedContainer

Configure authentication settings for sites and applications

		Parent
		container: CI<udm.EmbeddedDeployedContainer>
		The (embedded) deployed which contains this embedded deployed.

		Public properties
		anonymousAuthentication_logonMethod: ENUM [Batch, ClearText, Interactive, Network] = ClearText
		The logonMethod attribute can be one of the following possible values: Interactive - 0, Batch - 1, Network - 2, ClearText - 3.
		anonymousAuthentication_userIdentity: ENUM [SpecificUser, ApplicationPool] = SpecificUser
		Specifies the user identity type to authenticate anonymous users.
		basicAuthentication_logonMethod: ENUM [Batch, ClearText, Interactive, Network] = ClearText
		The logonMethod attribute can be one of the following possible values: Interactive - 0, Batch - 1, Network - 2, ClearText - 3.
		formsAuthentication_cookieless: ENUM [UseCookies, UseUri, AutoDetect, UseDeviceProfile] = UseDeviceProfile
		Defines whether cookies are used and their behavior.
		formsAuthentication_defaultUrl: STRING = default.aspx
		Defines the default URL that is used for redirection after authentication.
		formsAuthentication_loginUrl: STRING = login.aspx
		Specifies the URL to which the request is redirected for logon, if no valid authentication cookie is found.
		formsAuthentication_name: STRING = .ASPXAUTH
		Specifies the HTTP cookie to use for authentication. If multiple applications are running on a single server and each application requires a unique cookie, you must configure the cookie name in each Web.config file for each application.
		formsAuthentication_path: STRING = /
		Specifies the path for cookies that are issued by the application.
		formsAuthentication_protection: ENUM [All, Encryption, None, Validation] = All
		Specifies the type of encryption, if any, to use for cookies.
		formsAuthentication_timeout: STRING = 00:30:00
		Specifies the time after which the cookie expires. The time format is 'HH:MM:SS'. Default value is '00:30:00' (30 minutes).
		anonymousAuthentication_enabled: BOOLEAN = true
		Allows any user to access any public content without providing a user name and password challenge to the client browser. By default, Anonymous authentication is enabled
		anonymousAuthentication_password: STRING
		Specifies the password for Anonymous authentication.
		anonymousAuthentication_userName: STRING = IUSR
		Specifies the username for Anonymous authentication.
		aspnetImpersonation_impersonate: BOOLEAN
		Use ASP.NET impersonation when you want to run your ASP.NET application under a security context different from the default security context for ASP.NET application.
		aspnetImpersonation_password: STRING
		Specifies the password for account.
		aspnetImpersonation_userName: STRING
		Specifies the account IIS uses to impersonate. If you leave this value blank (that is, username=''), IIS is set to impersonate the authenticated user.
		basicAuthentication_defaultLogonDomain: STRING
		Specifies the default logon domain for Basic authentication.
		basicAuthentication_enabled: BOOLEAN
		Specifies whether Basic authentication is enabled.
		basicAuthentication_realm: STRING
		Specifies the realm for Basic authentication.
		clientCertificateMappingAuthentication_enabled: BOOLEAN
		Specifies whether Client Certificate Mapping authentication using Active Directory is enabled. For this setting to take effect, you must set this attribute with IIS Manager. If you use any other method to set this attribute, you must restart the Web server for the setting to take effect.
		deployable: CI<udm.EmbeddedDeployable>
		The embedded deployable that this embedded deployed is derived from.
		digestAuthentication_enabled: BOOLEAN
		Specifies whether Digest authentication is enabled.
		digestAuthentication_realm: STRING
		Specifies the realm for Digest authentication.
		formsAuthentication_domain: STRING
		Specifies an optional domain to set on outgoing forms-authentication cookies. This setting takes precedence over the domain that is used in the httpCookies element.
		formsAuthentication_enableCrossAppRedirects: BOOLEAN
		Indicates whether authenticated users are redirected to URLs in other Web applications.
		formsAuthentication_enabled: BOOLEAN
		Specifies whether ASP.NET forms–based authentication is enabled.
		formsAuthentication_requireSSL: BOOLEAN
		Specifies whether an SSL connection is required to transmit the authentication cookie.
		formsAuthentication_slidingExpiration: BOOLEAN = true
		Specifies whether sliding expiration is enabled. Sliding expiration resets the active authentication time for a cookie to expire upon each request during a single session.
		windowsAuthentication_authPersistNonNTLM: BOOLEAN = true
		Specifies whether IIS automatically reauthenticates every non-NTLM (for example, Kerberos) request, even those on the same connection. False enables multiple authentications for the same connections.
		windowsAuthentication_authPersistSingleRequest: BOOLEAN
		Setting this flag to true specifies that authentication persists only for a single request on a connection. IIS resets the authentication at the end of each request, and forces reauthentication on the next request of the session.
		windowsAuthentication_enabled: BOOLEAN
		Specifies whether Windows authentication is enabled.
		windowsAuthentication_providers: LIST_OF_STRING
		Specifies security support providers used for Windows authentication.
		windowsAuthentication_useKernelMode: BOOLEAN = true
		Specifies whether Windows authentication is done in kernel mode. Kernel-mode authentication may improve authentication performance and prevent authentication problems with application pools that are configured to use a custom identity.

iis.AuthenticationSpec

Type Hierarchy	udm.BaseEmbeddedDeployable >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployable

Configure authentication settings for sites and applications

		Public properties
		anonymousAuthentication_enabled: STRING
		Allows any user to access any public content without providing a user name and password challenge to the client browser. By default, Anonymous authentication is enabled (boolean) default(true)
		anonymousAuthentication_logonMethod: STRING
		The logonMethod attribute can be one of the following possible values: Interactive - 0, Batch - 1, Network - 2, ClearText - 3. (enum) values(Batch, ClearText, Interactive, Network) default(ClearText)
		anonymousAuthentication_password: STRING
		Specifies the password for Anonymous authentication. (string)
		anonymousAuthentication_userIdentity: STRING
		Specifies the user identity type to authenticate anonymous users. (enum) values(SpecificUser, ApplicationPool) default(SpecificUser)
		anonymousAuthentication_userName: STRING
		Specifies the username for Anonymous authentication. (string) default(IUSR)
		aspnetImpersonation_impersonate: STRING
		Use ASP.NET impersonation when you want to run your ASP.NET application under a security context different from the default security context for ASP.NET application. (boolean) default(false)
		aspnetImpersonation_password: STRING
		Specifies the password for account. (string)
		aspnetImpersonation_userName: STRING
		Specifies the account IIS uses to impersonate. If you leave this value blank (that is, username=''), IIS is set to impersonate the authenticated user. (string)
		basicAuthentication_defaultLogonDomain: STRING
		Specifies the default logon domain for Basic authentication. (string)
		basicAuthentication_enabled: STRING
		Specifies whether Basic authentication is enabled. (boolean) default(false)
		basicAuthentication_logonMethod: STRING
		The logonMethod attribute can be one of the following possible values: Interactive - 0, Batch - 1, Network - 2, ClearText - 3. (enum) values(Batch, ClearText, Interactive, Network) default(ClearText)
		basicAuthentication_realm: STRING
		Specifies the realm for Basic authentication. (string)
		clientCertificateMappingAuthentication_enabled: STRING
		Specifies whether Client Certificate Mapping authentication using Active Directory is enabled. For this setting to take effect, you must set this attribute with IIS Manager. If you use any other method to set this attribute, you must restart the Web server for the setting to take effect. (boolean) default(false)
		digestAuthentication_enabled: STRING
		Specifies whether Digest authentication is enabled. (boolean) default(false)
		digestAuthentication_realm: STRING
		Specifies the realm for Digest authentication. (string)
		formsAuthentication_cookieless: STRING
		Defines whether cookies are used and their behavior. (enum) values(UseCookies, UseUri, AutoDetect, UseDeviceProfile) default(UseDeviceProfile)
		formsAuthentication_defaultUrl: STRING
		Defines the default URL that is used for redirection after authentication. (string) default(default.aspx)
		formsAuthentication_domain: STRING
		Specifies an optional domain to set on outgoing forms-authentication cookies. This setting takes precedence over the domain that is used in the httpCookies element. (string)
		formsAuthentication_enableCrossAppRedirects: STRING
		Indicates whether authenticated users are redirected to URLs in other Web applications. (boolean) default(false)
		formsAuthentication_enabled: STRING
		Specifies whether ASP.NET forms–based authentication is enabled. (boolean) default(false)
		formsAuthentication_loginUrl: STRING
		Specifies the URL to which the request is redirected for logon, if no valid authentication cookie is found. (string) default(login.aspx)
		formsAuthentication_name: STRING
		Specifies the HTTP cookie to use for authentication. If multiple applications are running on a single server and each application requires a unique cookie, you must configure the cookie name in each Web.config file for each application. (string) default(.ASPXAUTH)
		formsAuthentication_path: STRING
		Specifies the path for cookies that are issued by the application. (string) default(/)
		formsAuthentication_protection: STRING
		Specifies the type of encryption, if any, to use for cookies. (enum) values(All, Encryption, None, Validation) default(All)
		formsAuthentication_requireSSL: STRING
		Specifies whether an SSL connection is required to transmit the authentication cookie. (boolean) default(false)
		formsAuthentication_slidingExpiration: STRING
		Specifies whether sliding expiration is enabled. Sliding expiration resets the active authentication time for a cookie to expire upon each request during a single session. (boolean) default(true)
		formsAuthentication_timeout: STRING
		Specifies the time after which the cookie expires. The time format is 'HH:MM:SS'. Default value is '00:30:00' (30 minutes). (string) default(00:30:00)
		windowsAuthentication_authPersistNonNTLM: STRING
		Specifies whether IIS automatically reauthenticates every non-NTLM (for example, Kerberos) request, even those on the same connection. False enables multiple authentications for the same connections. (boolean) default(true)
		windowsAuthentication_authPersistSingleRequest: STRING
		Setting this flag to true specifies that authentication persists only for a single request on a connection. IIS resets the authentication at the end of each request, and forces reauthentication on the next request of the session. (boolean) default(false)
		windowsAuthentication_enabled: STRING
		Specifies whether Windows authentication is enabled. (boolean) default(false)
		windowsAuthentication_providers: LIST_OF_STRING
		Specifies security support providers used for Windows authentication. (list_of_string)
		windowsAuthentication_useKernelMode: STRING
		Specifies whether Windows authentication is done in kernel mode. Kernel-mode authentication may improve authentication performance and prevent authentication problems with application pools that are configured to use a custom identity. (boolean) default(true)

iis.ConfigCollectionElement

Type Hierarchy	iis.Resource >> powershell.ExtensiblePowerShellDeployed >> powershell.BaseExtensiblePowerShellDeployed >> powershell.BasePowerShellDeployed >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Deployed, udm.EmbeddedDeployedContainer

Creates an IIS ConfigCollectionElement

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Public properties
		attributes: STRING
		attribute names and values in name~value format, one attribute per line
		directoryBrowse_showFlags: STRING = Date,Time,Size,Extension
		The showFlags attribute can have one or more of the following possible values. If you specify more than one value, separate the values with a comma (,). The default values are Date, Time, Size, Extension. None specifies that only the file or directory names are returned in a directory listing.
		filter: STRING
		Specifies the IIS configuration section, or an XPath query that returns a configuration element.
		atIndex: INTEGER
		The index at which the property is to be inserted.
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		directoryBrowse_enabled: BOOLEAN
		Specifies whether directory browsing is enabled (true) or disabled (false) on the Web server.
		psPath: STRING
		Specifies the configuration path. This can be either an IIS configuration path in the format computer name/webroot/apphost, or the IIS module path in this format IIS:\sites\Default Web Site.
		startOnCreate: BOOLEAN = true
		If set to true, the start script will be executed if this deployed is being created.
		stopOnDestroy: BOOLEAN = true
		If set to true, the stop script will be executed if this deployed is being destroyed.
		stopStartOnModify: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployed is being modified.
		stopStartOnNoop: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployable is not being modified.

		Hidden properties
		createOptions: SET_OF_STRING = [uploadArtifactData, uploadClasspathResources]
		Options for the create step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		createOrder: INTEGER = 60
		Order at which the create step will be executed.
		createScript: STRING = iis/create-or-modify-config-coll-element.ps1
		PowerShell script invoked to create a resource (or deploy an artifact) on Windows.
		createVerb: STRING = Create
		Verb that is used to prefix the description for the create step.
		destroyOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the destroy step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		destroyOrder: INTEGER = 40
		Order at which the destroy step will be executed.
		destroyScript: STRING = iis/destroy-config-coll-element.ps1
		PowerShell script invoked to destroy a resource (or undeploy an artifact) on Windows.
		destroyVerb: STRING = Destroy
		Verb that is used to prefix the description for the destroy step.
		discoverOrder: INTEGER = 50
		Order at which the discover step will be executed.
		libraryScripts: LIST_OF_STRING = [iis/library/resource.ps1]
		List of scripts to append to the the step script.
		maxBatchSize: INTEGER = 100
		Maximum number of steps in a batch.
		modifyOptions: SET_OF_STRING = [exposePreviousDeployed]
		Options for the modify step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		modifyOrder: INTEGER = 60
		Order at which the modify step will be executed.
		modifyScript: STRING = iis/create-or-modify-config-coll-element.ps1
		PowerShell script invoked to modify a resource (or an artifact) on Windows.
		modifyVerb: STRING = Modify
		Verb that is used to prefix the description for the modify step.
		noopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the noop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		noopOrder: INTEGER = 50
		Order at which the noop step will be executed.
		noopVerb: STRING = Noop
		Verb that is used to prefix the description for the noop step.
		startOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the start step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		startOrder: INTEGER = 90
		Order at which the start step will be executed.
		startVerb: STRING = Start
		Verb that is used to prefix the description for the start step.
		stopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the stop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		stopOrder: INTEGER = 10
		Order at which the stop script will be executed.
		stopVerb: STRING = Stop
		Verb that is used to prefix the description for the stop step.
		batchSteps: BOOLEAN
		If set to true, multiple steps at the same order will be batched together in one batch to improve performance over high-latency WinRM connections
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.
		classpathResources: SET_OF_STRING
		Additional classpath resources that should be uploaded to the working directory before executing the script.
		discoverScript: STRING
		Script invoked to discover and inspect deployeds of this type.
		exposePasswordPropertiesOnHosts: BOOLEAN
		Whether to add the host password to the powershell variable values.
		location: STRING
		Location of the configuration property setting.
		noopScript: STRING
		PowerShell script invoked to noop a resource or an artifact on Windows.
		startScript: STRING
		PowerShell script invoked to start a resource of an artifact on Windows.
		stopScript: STRING
		PowerShell script invoked to stop a resource or an artifact on Windows.
		useSidecarIniFile: BOOLEAN
		Whether to use a sidecar '.ini' file to transfer the powershell variable values.

iis.ConfigCollectionElementSpec

Type Hierarchy	powershell.BasePowerShellDeployable >> udm.BaseDeployable >> udm.BaseConfigurationItem
Interfaces	udm.Deployable, udm.Taggable

Specification of an IIS ConfigCollectionElementSpec

		Public properties
		atIndex: STRING
		The index at which the property is to be inserted. (integer)
		attributes: STRING
		attribute names and values in name~value format, one attribute per line (string)
		directoryBrowse_enabled: STRING
		Specifies whether directory browsing is enabled (true) or disabled (false) on the Web server. (boolean) default(false)
		directoryBrowse_showFlags: STRING
		The showFlags attribute can have one or more of the following possible values. If you specify more than one value, separate the values with a comma (,). The default values are Date, Time, Size, Extension. None specifies that only the file or directory names are returned in a directory listing. (string) default(Date,Time,Size,Extension)
		filter: STRING
		Specifies the IIS configuration section, or an XPath query that returns a configuration element. (string)
		psPath: STRING
		Specifies the configuration path. This can be either an IIS configuration path in the format computer name/webroot/apphost, or the IIS module path in this format IIS:\sites\Default Web Site. (string)
		startOnCreate: STRING
		If set to true, the start script will be executed if this deployed is being created. (boolean) default(true)
		stopOnDestroy: STRING
		If set to true, the stop script will be executed if this deployed is being destroyed. (boolean) default(true)
		stopStartOnModify: STRING
		If set to true, the stop and start scripts will be executed if this deployed is being modified. (boolean) default(true)
		stopStartOnNoop: STRING
		If set to true, the stop and start scripts will be executed if this deployable is not being modified. (boolean) default(true)
		tags: SET_OF_STRING
		If set, this deployable will only be mapped automatically to containers with the same tag.

		Hidden properties
		boundTemplates: SET_OF_CI<udm.Template>
		The set of CI templates.

iis.ISAPIFilter

Type Hierarchy	udm.BaseEmbeddedDeployed >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployed, udm.EmbeddedDeployedContainer

Creates an IIS website ISAPI Filter

		Parent
		container: CI<udm.EmbeddedDeployedContainer>
		The (embedded) deployed which contains this embedded deployed.

		Public properties
		executable: STRING
		Absolute path to the DLL executable
		filterName: STRING
		Name of the ISAPI Filter
		deployable: CI<udm.EmbeddedDeployable>
		The embedded deployable that this embedded deployed is derived from.

iis.ISAPIFilterSpec

Type Hierarchy	udm.BaseEmbeddedDeployable >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployable

Specification of an IIS ISAPI filter

		Public properties
		executable: STRING
		Absolute path to the DLL executable (string)
		filterName: STRING
		Name of the ISAPI Filter (string)

iis.PublishedWebContent

Type Hierarchy	powershell.ExtensiblePowerShellDeployedArtifact >> powershell.BaseExtensiblePowerShellDeployedArtifact >> powershell.BasePowerShellDeployedArtifact >> udm.BaseDeployedArtifact >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Artifact, udm.Deployed, udm.DerivedArtifact, udm.EmbeddedDeployedContainer

Published IIS web content

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Public properties
		targetPath: STRING
		Path to the application directory where this web content should be copied; for example, C:\inetpub\wwwroot\application
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		placeholders: MAP_STRING_STRING
		A Map containing all the placeholders mapped to their values. Special values are <ignore> or <empty>
		startOnCreate: BOOLEAN = true
		If set to true, the start script will be executed if this deployed is being created.
		stopOnDestroy: BOOLEAN = true
		If set to true, the stop script will be executed if this deployed is being destroyed.
		stopStartOnModify: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployed is being modified.
		stopStartOnNoop: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployable is not being modified.

		Hidden properties
		createOptions: SET_OF_STRING = [uploadArtifactData, uploadClasspathResources]
		Options for the create step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		createOrder: INTEGER = 54
		Order at which the create step will be executed.
		createScript: STRING = iis/deploy-webcontent.ps1
		PowerShell script invoked to create a resource (or deploy an artifact) on Windows.
		createVerb: STRING = Copy
		Verb that is used to prefix the description for the create step.
		destroyOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the destroy step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		destroyOrder: INTEGER = 46
		Order at which the destroy step will be executed.
		destroyScript: STRING = iis/undeploy-webcontent.ps1
		PowerShell script invoked to destroy a resource (or undeploy an artifact) on Windows.
		destroyVerb: STRING = Remove
		Verb that is used to prefix the description for the destroy step.
		discoverOrder: INTEGER = 50
		Order at which the discover step will be executed.
		maxBatchSize: INTEGER = 100
		Maximum number of steps in a batch.
		modifyOptions: SET_OF_STRING = [uploadArtifactData, uploadClasspathResources]
		Options for the modify step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		modifyOrder: INTEGER = 54
		Order at which the modify step will be executed.
		modifyScript: STRING = iis/deploy-webcontent.ps1
		PowerShell script invoked to modify a resource (or an artifact) on Windows.
		modifyVerb: STRING = Copy
		Verb that is used to prefix the description for the modify step.
		noopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the noop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		noopOrder: INTEGER = 50
		Order at which the noop step will be executed.
		noopVerb: STRING = Noop
		Verb that is used to prefix the description for the noop step.
		startOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the start step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		startOrder: INTEGER = 90
		Order at which the start step will be executed.
		startVerb: STRING = Start
		Verb that is used to prefix the description for the start step.
		stopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the stop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		stopOrder: INTEGER = 10
		Order at which the stop script will be executed.
		stopVerb: STRING = Stop
		Verb that is used to prefix the description for the stop step.
		batchSteps: BOOLEAN
		If set to true, multiple steps at the same order will be batched together in one batch to improve performance over high-latency WinRM connections
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.
		classpathResources: SET_OF_STRING
		Additional classpath resources that should be uploaded to the working directory before executing the script.
		discoverScript: STRING
		Script invoked to discover and inspect deployeds of this type.
		exposePasswordPropertiesOnHosts: BOOLEAN
		Whether to add the host password to the powershell variable values.
		libraryScripts: LIST_OF_STRING
		List of scripts to append to the the step script.
		noopScript: STRING
		PowerShell script invoked to noop a resource or an artifact on Windows.
		startScript: STRING
		PowerShell script invoked to start a resource of an artifact on Windows.
		stopScript: STRING
		PowerShell script invoked to stop a resource or an artifact on Windows.
		useSidecarIniFile: BOOLEAN
		Whether to use a sidecar '.ini' file to transfer the powershell variable values.

iis.Resource

Virtual Type
Type Hierarchy	powershell.ExtensiblePowerShellDeployed >> powershell.BaseExtensiblePowerShellDeployed >> powershell.BasePowerShellDeployed >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Deployed, udm.EmbeddedDeployedContainer

Description unavailable

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Public properties
		directoryBrowse_showFlags: STRING = Date,Time,Size,Extension
		The showFlags attribute can have one or more of the following possible values. If you specify more than one value, separate the values with a comma (,). The default values are Date, Time, Size, Extension. None specifies that only the file or directory names are returned in a directory listing.
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		directoryBrowse_enabled: BOOLEAN
		Specifies whether directory browsing is enabled (true) or disabled (false) on the Web server.
		startOnCreate: BOOLEAN = true
		If set to true, the start script will be executed if this deployed is being created.
		stopOnDestroy: BOOLEAN = true
		If set to true, the stop script will be executed if this deployed is being destroyed.
		stopStartOnModify: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployed is being modified.
		stopStartOnNoop: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployable is not being modified.

		Hidden properties
		createOptions: SET_OF_STRING = [uploadArtifactData, uploadClasspathResources]
		Options for the create step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		createOrder: INTEGER = 60
		Order at which the create step will be executed.
		createVerb: STRING = Create
		Verb that is used to prefix the description for the create step.
		destroyOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the destroy step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		destroyOrder: INTEGER = 40
		Order at which the destroy step will be executed.
		destroyVerb: STRING = Destroy
		Verb that is used to prefix the description for the destroy step.
		discoverOrder: INTEGER = 50
		Order at which the discover step will be executed.
		libraryScripts: LIST_OF_STRING = [iis/library/resource.ps1]
		List of scripts to append to the the step script.
		maxBatchSize: INTEGER = 100
		Maximum number of steps in a batch.
		modifyOptions: SET_OF_STRING = [uploadArtifactData, uploadClasspathResources]
		Options for the modify step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		modifyOrder: INTEGER = 60
		Order at which the modify step will be executed.
		modifyVerb: STRING = Modify
		Verb that is used to prefix the description for the modify step.
		noopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the noop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		noopOrder: INTEGER = 50
		Order at which the noop step will be executed.
		noopVerb: STRING = Noop
		Verb that is used to prefix the description for the noop step.
		startOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the start step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		startOrder: INTEGER = 90
		Order at which the start step will be executed.
		startVerb: STRING = Start
		Verb that is used to prefix the description for the start step.
		stopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the stop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		stopOrder: INTEGER = 10
		Order at which the stop script will be executed.
		stopVerb: STRING = Stop
		Verb that is used to prefix the description for the stop step.
		batchSteps: BOOLEAN
		If set to true, multiple steps at the same order will be batched together in one batch to improve performance over high-latency WinRM connections
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.
		classpathResources: SET_OF_STRING
		Additional classpath resources that should be uploaded to the working directory before executing the script.
		createScript: STRING
		PowerShell script invoked to create a resource (or deploy an artifact) on Windows.
		destroyScript: STRING
		PowerShell script invoked to destroy a resource (or undeploy an artifact) on Windows.
		discoverScript: STRING
		Script invoked to discover and inspect deployeds of this type.
		exposePasswordPropertiesOnHosts: BOOLEAN
		Whether to add the host password to the powershell variable values.
		modifyScript: STRING
		PowerShell script invoked to modify a resource (or an artifact) on Windows.
		noopScript: STRING
		PowerShell script invoked to noop a resource or an artifact on Windows.
		startScript: STRING
		PowerShell script invoked to start a resource of an artifact on Windows.
		stopScript: STRING
		PowerShell script invoked to stop a resource or an artifact on Windows.
		useSidecarIniFile: BOOLEAN
		Whether to use a sidecar '.ini' file to transfer the powershell variable values.

iis.Server

Type Hierarchy	powershell.BasePowerShellContainer >> udm.BaseContainer >> udm.BaseConfigurationItem
Interfaces	udm.Container, overthere.HostContainer, powershell.PowerShellContainer, udm.Taggable

Internet Information Services server definition

		Parent
		host: CI<overthere.Host>
		Host upon which the container resides

		Public properties
		tags: SET_OF_STRING
		If set, only deployables with the same tag will be automatically mapped to this container.

		Hidden properties
		discoverOrder: INTEGER
		Order at which the discover step will be executed.
		libraryScripts: LIST_OF_STRING = [iis/runtime/assert.ps1, iis/runtime/load-webadministration.ps1]
		List of scripts to append to the the step script.
		deployedsToDiscover: SET_OF_STRING
		Deployeds To Discover
		discoverScript: STRING
		Script invoked to inspect this container and discover deployeds on it.
		powerShellPath: STRING = powershell
		Power Shell Path

iis.VirtualDirectory

Type Hierarchy	iis.Resource >> powershell.ExtensiblePowerShellDeployed >> powershell.BaseExtensiblePowerShellDeployed >> powershell.BasePowerShellDeployed >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Deployed, udm.EmbeddedDeployedContainer

Creates an IIS virtual directory

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Children
		authentication: SET_OF_CI<iis.Authentication>
		Authentication settings for this website

		Public properties
		directoryBrowse_showFlags: STRING = Date,Time,Size,Extension
		The showFlags attribute can have one or more of the following possible values. If you specify more than one value, separate the values with a comma (,). The default values are Date, Time, Size, Extension. None specifies that only the file or directory names are returned in a directory listing.
		physicalPath: STRING
		Physical path of this virtual directory
		websiteName: STRING
		Name of the website under which to create this virtual directory
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		directoryBrowse_enabled: BOOLEAN
		Specifies whether directory browsing is enabled (true) or disabled (false) on the Web server.
		startOnCreate: BOOLEAN = true
		If set to true, the start script will be executed if this deployed is being created.
		stopOnDestroy: BOOLEAN = true
		If set to true, the stop script will be executed if this deployed is being destroyed.
		stopStartOnModify: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployed is being modified.
		stopStartOnNoop: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployable is not being modified.
		virtualDirectoryPath: STRING
		Path of this virtual directory within the website. Defaults to the name of the deployed if not specified

		Hidden properties
		createOptions: SET_OF_STRING = [uploadArtifactData, uploadClasspathResources]
		Options for the create step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		createOrder: INTEGER = 60
		Order at which the create step will be executed.
		createScript: STRING = iis/create-or-modify-virtual-directory.ps1
		PowerShell script invoked to create a resource (or deploy an artifact) on Windows.
		createVerb: STRING = Create
		Verb that is used to prefix the description for the create step.
		destroyOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the destroy step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		destroyOrder: INTEGER = 40
		Order at which the destroy step will be executed.
		destroyScript: STRING = iis/destroy-virtual-directory.ps1
		PowerShell script invoked to destroy a resource (or undeploy an artifact) on Windows.
		destroyVerb: STRING = Destroy
		Verb that is used to prefix the description for the destroy step.
		discoverOrder: INTEGER = 50
		Order at which the discover step will be executed.
		discoverScript: STRING = iis/inspect-virtual-directories.ps1
		Script invoked to discover and inspect deployeds of this type.
		libraryScripts: LIST_OF_STRING = [iis/library/resource.ps1]
		List of scripts to append to the the step script.
		maxBatchSize: INTEGER = 100
		Maximum number of steps in a batch.
		modifyOptions: SET_OF_STRING = [uploadArtifactData, exposePreviousDeployed]
		Options for the modify step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		modifyOrder: INTEGER = 60
		Order at which the modify step will be executed.
		modifyScript: STRING = iis/create-or-modify-virtual-directory.ps1
		PowerShell script invoked to modify a resource (or an artifact) on Windows.
		modifyVerb: STRING = Modify
		Verb that is used to prefix the description for the modify step.
		noopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the noop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		noopOrder: INTEGER = 50
		Order at which the noop step will be executed.
		noopVerb: STRING = Noop
		Verb that is used to prefix the description for the noop step.
		startOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the start step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		startOrder: INTEGER = 90
		Order at which the start step will be executed.
		startVerb: STRING = Start
		Verb that is used to prefix the description for the start step.
		stopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the stop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		stopOrder: INTEGER = 10
		Order at which the stop script will be executed.
		stopVerb: STRING = Stop
		Verb that is used to prefix the description for the stop step.
		batchSteps: BOOLEAN
		If set to true, multiple steps at the same order will be batched together in one batch to improve performance over high-latency WinRM connections
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.
		classpathResources: SET_OF_STRING
		Additional classpath resources that should be uploaded to the working directory before executing the script.
		exposePasswordPropertiesOnHosts: BOOLEAN
		Whether to add the host password to the powershell variable values.
		noopScript: STRING
		PowerShell script invoked to noop a resource or an artifact on Windows.
		startScript: STRING
		PowerShell script invoked to start a resource of an artifact on Windows.
		stopScript: STRING
		PowerShell script invoked to stop a resource or an artifact on Windows.
		useSidecarIniFile: BOOLEAN
		Whether to use a sidecar '.ini' file to transfer the powershell variable values.

iis.VirtualDirectorySpec

Type Hierarchy	powershell.BasePowerShellDeployable >> udm.BaseDeployable >> udm.BaseConfigurationItem
Interfaces	udm.Deployable, udm.Taggable

Specification of an IIS virtual directory

		Children
		authentication: SET_OF_CI<iis.AuthenticationSpec>
		Authentication settings for this website

		Public properties
		directoryBrowse_enabled: STRING
		Specifies whether directory browsing is enabled (true) or disabled (false) on the Web server. (boolean) default(false)
		directoryBrowse_showFlags: STRING
		The showFlags attribute can have one or more of the following possible values. If you specify more than one value, separate the values with a comma (,). The default values are Date, Time, Size, Extension. None specifies that only the file or directory names are returned in a directory listing. (string) default(Date,Time,Size,Extension)
		physicalPath: STRING
		Physical path of this virtual directory (string)
		startOnCreate: STRING
		If set to true, the start script will be executed if this deployed is being created. (boolean) default(true)
		stopOnDestroy: STRING
		If set to true, the stop script will be executed if this deployed is being destroyed. (boolean) default(true)
		stopStartOnModify: STRING
		If set to true, the stop and start scripts will be executed if this deployed is being modified. (boolean) default(true)
		stopStartOnNoop: STRING
		If set to true, the stop and start scripts will be executed if this deployable is not being modified. (boolean) default(true)
		tags: SET_OF_STRING
		If set, this deployable will only be mapped automatically to containers with the same tag.
		virtualDirectoryPath: STRING
		Path of this virtual directory within the website. Defaults to the name of the deployed if not specified (string)
		websiteName: STRING
		Name of the website under which to create this virtual directory (string)

		Hidden properties
		boundTemplates: SET_OF_CI<udm.Template>
		The set of CI templates.

iis.WebContent

Type Hierarchy	powershell.BasePowerShellDeployableFolderArtifact >> udm.BaseDeployableFolderArtifact >> udm.BaseDeployableArtifact >> udm.BaseDeployable >> udm.BaseConfigurationItem
Interfaces	udm.Artifact, udm.Deployable, udm.DeployableArtifact, udm.FolderArtifact, udm.SourceArtifact, udm.Taggable

Folder containing IIS web content (ASP pages, HTML pages, images, stylesheets, and so on). Important: When packaging web content as a ZIP file, do so at the level of the content, not at the level of the folder that contains it.

		Public properties
		checksum: STRING
		The checksum used to detect differences on the artifact. If not provided, it will be calculated by XL Deploy.
		credentials: CI<credentials.Credentials>
		Credentials of the URI.
		excludeFileNamesRegex: STRING
		Regular expression that matches file names that must be excluded from scanning
		fileEncodings: MAP_STRING_STRING = { .+\.properties=ISO-8859-1 }
		A map that maps regular expressions matching the full path of file(s) in the artifact to character set encodings
		fileUri: STRING
		The URI pointing to the (remote) location of the file this artifact represents
		isRescanned: BOOLEAN
		Indicates if the artifact has been rescanned
		placeholders: SET_OF_STRING
		Placeholders detected in this artifact
		preScannedPlaceholders: BOOLEAN
		Whether this artifact has been pre-scanned by the packager (ie. scanned for placeholders and checksum is set)
		proxySettings: CI<credentials.ProxySettings>
		Proxy Settings for artifact location
		scanPlaceholders: BOOLEAN = true
		Whether to scan this artifact to replace placeholders when it is imported
		startOnCreate: STRING
		If set to true, the start script will be executed if this deployed is being created. (boolean) default(true)
		stopOnDestroy: STRING
		If set to true, the stop script will be executed if this deployed is being destroyed. (boolean) default(true)
		stopStartOnModify: STRING
		If set to true, the stop and start scripts will be executed if this deployed is being modified. (boolean) default(true)
		stopStartOnNoop: STRING
		If set to true, the stop and start scripts will be executed if this deployable is not being modified. (boolean) default(true)
		tags: SET_OF_STRING
		If set, this deployable will only be mapped automatically to containers with the same tag.
		targetPath: STRING
		Path to the application directory where this web content should be copied; for example, C:\inetpub\wwwroot\application (string)

		Hidden properties
		textFileNamesRegex: STRING = .+\.(cfg \| conf \| config \| ini \| properties \| props \| txt \| asp \| aspx \| htm \| html \| jsf \| jsp \| xht \| xhtml \| sql \| xml \| xsd \| xsl \| xslt)
		Regular expression that matches file names of text files
		boundTemplates: SET_OF_CI<udm.Template>
		The set of CI templates.
		delimiters: STRING = {{ }}
		The delimiters used indicate placeholders, defaults to '{{ }}'. This is a 5 character string with a space in the middle, the first two are the leading delimiter, the last two are the closing delimiter

iis.Website

Type Hierarchy	iis.Resource >> powershell.ExtensiblePowerShellDeployed >> powershell.BaseExtensiblePowerShellDeployed >> powershell.BasePowerShellDeployed >> udm.BaseDeployed >> udm.BaseConfigurationItem
Interfaces	udm.Deployed, udm.EmbeddedDeployedContainer

Deploys an IIS website

		Parent
		container: CI<udm.Container>
		The container on which this deployed runs.

		Children
		bindings: SET_OF_CI<iis.WebsiteBinding>
		Bindings of this website
		isapiFilters: SET_OF_CI<iis.ISAPIFilter>
		ISAPI Filters of this website
		authentication: SET_OF_CI<iis.Authentication>
		Authentication settings for this website

		Public properties
		applicationPoolName: STRING = DefaultAppPool
		Name of the application pool for this website.
		directoryBrowse_showFlags: STRING = Date,Time,Size,Extension
		The showFlags attribute can have one or more of the following possible values. If you specify more than one value, separate the values with a comma (,). The default values are Date, Time, Size, Extension. None specifies that only the file or directory names are returned in a directory listing.
		physicalPath: STRING
		Physical path of this website
		deployable: CI<udm.Deployable>
		The deployable that this deployed is derived from.
		directoryBrowse_enabled: BOOLEAN
		Specifies whether directory browsing is enabled (true) or disabled (false) on the Web server.
		limitsConnectionTimeout: INTEGER = 120
		Specifies the time (in seconds) that IIS waits before it disconnects a connection that is considered inactive.
		logFileDirectory: STRING = %SystemDrive%\inetpub\logs\LogFiles
		Specifies the logging directory, where the log file and logging-related support files are stored.
		logFileEnabled: BOOLEAN = true
		Specifies whether logging is enabled (true) or disabled (false) for a site.
		logFileLocalTimeRollover: BOOLEAN
		Specifies whether a new log file is created based on local time or Coordinated Universal Time (UTC), which was previously called Greenwich Mean Time (GMT).
		logFileLogExtFileFlags: STRING = Date,Time,ClientIP,UserName,ServerIP,Method,UriStem,UriQuery,HttpStatus,Win32Status,TimeTaken,ServerPort,UserAgent,HttpSubStatus
		Specifies the categories of information that are written to either the log file (when you use W3C Extended log file format) or to the ODBC data source during logging events for a site.
		logFileLogFormat: ENUM [W3C, NCSA, IIS] = W3C
		Specifies the log file format.
		logFilePeriod: ENUM [Hourly, Daily, Weekly, Monthly, MaxSize] = Daily
		Specifies how often IIS creates a new log file.
		logFileTruncateSize: STRING = 1048576
		File size to create a new log file when the file reaches a certain size (in bytes)
		numberOfChecks: INTEGER = 3
		Specifies the number of times to checks when stopping/starting the website. Will fail step if all attempts fails. Default value is 3 times
		sleepBetweenChecks: INTEGER = 5
		Specifies the number of seconds to wait between checks when stopping/starting the website. Default value is 5 seconds
		startOnCreate: BOOLEAN = true
		If set to true, the start script will be executed if this deployed is being created.
		stopOnDestroy: BOOLEAN = true
		If set to true, the stop script will be executed if this deployed is being destroyed.
		stopStartOnModify: BOOLEAN = true
		If set to true, the stop and start scripts will be executed if this deployed is being modified.
		stopStartOnNoop: BOOLEAN = true
		If set to true, this website is stopped and started when another component in the same package is deployed
		websiteId: INTEGER
		Defines the id number for this website
		websiteName: STRING
		Name of this website. Defaults to the name of the deployed if not specified

		Hidden properties
		createOptions: SET_OF_STRING = [uploadArtifactData, uploadClasspathResources]
		Options for the create step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		createOrder: INTEGER = 58
		Order at which the create step will be executed.
		createScript: STRING = iis/create-or-modify-website.ps1
		PowerShell script invoked to create a resource (or deploy an artifact) on Windows.
		createVerb: STRING = Create
		Verb that is used to prefix the description for the create step.
		destroyOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the destroy step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		destroyOrder: INTEGER = 42
		Order at which the destroy step will be executed.
		destroyScript: STRING = iis/destroy-website.ps1
		PowerShell script invoked to destroy a resource (or undeploy an artifact) on Windows.
		destroyVerb: STRING = Destroy
		Verb that is used to prefix the description for the destroy step.
		discoverOrder: INTEGER = 50
		Order at which the discover step will be executed.
		discoverScript: STRING = iis/inspect-websites.ps1
		Script invoked to discover and inspect deployeds of this type.
		libraryScripts: LIST_OF_STRING = [iis/library/resource.ps1]
		List of scripts to append to the the step script.
		maxBatchSize: INTEGER = 100
		Maximum number of steps in a batch.
		modifyOptions: SET_OF_STRING = [uploadArtifactData, exposePreviousDeployed]
		Options for the modify step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		modifyOrder: INTEGER = 58
		Order at which the modify step will be executed.
		modifyScript: STRING = iis/create-or-modify-website.ps1
		PowerShell script invoked to modify a resource (or an artifact) on Windows.
		modifyVerb: STRING = Modify
		Verb that is used to prefix the description for the modify step.
		noopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the noop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		noopOrder: INTEGER = 50
		Order at which the noop step will be executed.
		noopVerb: STRING = Noop
		Verb that is used to prefix the description for the noop step.
		startOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the start step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		startOrder: INTEGER = 90
		Order at which the start step will be executed.
		startScript: STRING = iis/start-website.ps1
		PowerShell script invoked to start a resource of an artifact on Windows.
		startVerb: STRING = Start
		Verb that is used to prefix the description for the start step.
		stopOptions: SET_OF_STRING = [uploadClasspathResources]
		Options for the stop step (1 or more of: none,uploadArtifactData,uploadClasspathResources,exposeDeployedApplication,exposePreviousDeployed).
		stopOrder: INTEGER = 10
		Order at which the stop script will be executed.
		stopScript: STRING = iis/stop-website.ps1
		PowerShell script invoked to stop a resource or an artifact on Windows.
		stopVerb: STRING = Stop
		Verb that is used to prefix the description for the stop step.
		batchSteps: BOOLEAN
		If set to true, multiple steps at the same order will be batched together in one batch to improve performance over high-latency WinRM connections
		boundConfigurationItems: SET_OF_CI<udm.ConfigurationItem>
		The set of created CIs.
		classpathResources: SET_OF_STRING
		Additional classpath resources that should be uploaded to the working directory before executing the script.
		exposePasswordPropertiesOnHosts: BOOLEAN
		Whether to add the host password to the powershell variable values.
		noopScript: STRING
		PowerShell script invoked to noop a resource or an artifact on Windows.
		useSidecarIniFile: BOOLEAN
		Whether to use a sidecar '.ini' file to transfer the powershell variable values.

iis.WebsiteBinding

Type Hierarchy	udm.BaseEmbeddedDeployed >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployed, udm.EmbeddedDeployedContainer

Create an IIS website binding

		Parent
		container: CI<udm.EmbeddedDeployedContainer>
		The (embedded) deployed which contains this embedded deployed.

		Public properties
		certRequired: ENUM [Ignore, Accept, Require] = Ignore
		Web site or application uses client certificates
		ipAddress: STRING = *
		IP address
		port: INTEGER = 80
		Port
		protocol: STRING = http
		Protocol
		certificateName: STRING
		The hash of the certificatename that can be found under IIS:\SslBindings
		deployable: CI<udm.EmbeddedDeployable>
		The embedded deployable that this embedded deployed is derived from.
		enableSni: BOOLEAN
		Require Server Name Indication
		hostHeader: STRING
		Host Header
		sslRequired: BOOLEAN
		Require SSL for the content of a website or application

iis.WebsiteBindingSpec

Type Hierarchy	udm.BaseEmbeddedDeployable >> udm.BaseConfigurationItem
Interfaces	udm.EmbeddedDeployable

Specification of an IIS website binding

		Public properties
		certRequired: STRING
		Web site or application uses client certificates (enum) values(Ignore, Accept, Require) default(Ignore)
		certificateName: STRING
		The hash of the certificatename that can be found under IIS:\SslBindings (string)
		enableSni: STRING
		Require Server Name Indication (boolean) default(false)
		hostHeader: STRING
		Host Header (string)
		ipAddress: STRING
		IP address (string) default(*)
		port: STRING
		Port (integer) default(80)
		protocol: STRING
		Protocol (string) default(http)
		sslRequired: STRING
		Require SSL for the content of a website or application (boolean) default(false)

iis.WebsiteSpec

Type Hierarchy	powershell.BasePowerShellDeployable >> udm.BaseDeployable >> udm.BaseConfigurationItem
Interfaces	udm.Deployable, udm.Taggable

Specification of an IIS website

		Children
		bindings: SET_OF_CI<iis.WebsiteBindingSpec>
		Bindings of this website
		isapiFilters: SET_OF_CI<iis.ISAPIFilterSpec>
		ISAPI Filters of this website
		authentication: SET_OF_CI<iis.AuthenticationSpec>
		Authentication settings for this website

		Public properties
		applicationPoolName: STRING
		Name of the application pool for this website. (string) default(DefaultAppPool)
		directoryBrowse_enabled: STRING
		Specifies whether directory browsing is enabled (true) or disabled (false) on the Web server. (boolean) default(false)
		directoryBrowse_showFlags: STRING
		The showFlags attribute can have one or more of the following possible values. If you specify more than one value, separate the values with a comma (,). The default values are Date, Time, Size, Extension. None specifies that only the file or directory names are returned in a directory listing. (string) default(Date,Time,Size,Extension)
		limitsConnectionTimeout: STRING
		Specifies the time (in seconds) that IIS waits before it disconnects a connection that is considered inactive. (integer) default(120)
		logFileDirectory: STRING
		Specifies the logging directory, where the log file and logging-related support files are stored. (string) default(%SystemDrive%\inetpub\logs\LogFiles)
		logFileEnabled: STRING
		Specifies whether logging is enabled (true) or disabled (false) for a site. (boolean) default(true)
		logFileLocalTimeRollover: STRING
		Specifies whether a new log file is created based on local time or Coordinated Universal Time (UTC), which was previously called Greenwich Mean Time (GMT). (boolean) default(false)
		logFileLogExtFileFlags: STRING
		Specifies the categories of information that are written to either the log file (when you use W3C Extended log file format) or to the ODBC data source during logging events for a site. (string) default(Date,Time,ClientIP,UserName,ServerIP,Method,UriStem,UriQuery,HttpStatus,Win32Status,TimeTaken,ServerPort,UserAgent,HttpSubStatus)
		logFileLogFormat: STRING
		Specifies the log file format. (enum) values(W3C, NCSA, IIS) default(W3C)
		logFilePeriod: STRING
		Specifies how often IIS creates a new log file. (enum) values(Hourly, Daily, Weekly, Monthly, MaxSize) default(Daily)
		logFileTruncateSize: STRING
		File size to create a new log file when the file reaches a certain size (in bytes) (string) default(1048576)
		numberOfChecks: STRING
		Specifies the number of times to checks when stopping/starting the website. Will fail step if all attempts fails. Default value is 3 times (integer) default(3)
		physicalPath: STRING
		Physical path of this website (string)
		sleepBetweenChecks: STRING
		Specifies the number of seconds to wait between checks when stopping/starting the website. Default value is 5 seconds (integer) default(5)
		startOnCreate: STRING
		If set to true, the start script will be executed if this deployed is being created. (boolean) default(true)
		stopOnDestroy: STRING
		If set to true, the stop script will be executed if this deployed is being destroyed. (boolean) default(true)
		stopStartOnModify: STRING
		If set to true, the stop and start scripts will be executed if this deployed is being modified. (boolean) default(true)
		stopStartOnNoop: STRING
		If set to true, this website is stopped and started when another component in the same package is deployed (boolean) default(true)
		tags: SET_OF_STRING
		If set, this deployable will only be mapped automatically to containers with the same tag.
		websiteId: STRING
		Defines the id number for this website (integer)
		websiteName: STRING
		Name of this website. Defaults to the name of the deployed if not specified (string)

		Hidden properties
		boundTemplates: SET_OF_CI<udm.Template>
		The set of CI templates.